Project Zero G Forums

sidewayz69

u need 2 check your cam sensor timing and your engine timing

sidewayz69

lol
the air flow...
lol
take it easy
lol
so you are saying that i can take the cams from a turbo head an put it in a non turbo head....
will i have 2 do anything with the cam sensor timing?

sidewayz69

but there is another thing u can do
instead the pipe from the water pump all the way 2 the back into the goose neck u can plug off the line an on the water pump outlet
u will see another water jacket...
that water jacket can be removed and u can fabricate a pipe 2 go there..
that will be the "in' 2 ...

sidewayz69

ok
but isn't the difference between the 1 an 2g head is the air flow?
cause 1 is a 6pin an the other is a 7pin
i am running a 1g block with a 2g head non turbo.
an i dismantled turbo head 1g and a non turbo head 2g

all the valves were the same an ports for cooling an oil
the difference was that the ...

sidewayz69

lolzzz
i now seein that
lolzzz.
i got so excited when i saw those pics..
wow!!!!
cause every 1 that i no has sr,rb,jz power
no 1 has the 4g63 rwd conversion
ppl laughed at me when i was puttin in my engine
' yuh wastin time.. go sr na"
1g block
2g head
extractors
act copper clutch
17" alloys
non ...

sidewayz69

sweeeeeeeeeeeeet

real nice good work
what time r u makin?

sidewayz69

soo i got the car 2 work properly.........
when i bought the engine..
i did not take out or adjust anything so that i will not fall in to any problems but guess what?...
the cam sensor was in the incorrect position all this time....ahhhhhhh
a friend of mine found out this....
so there i was ...

sidewayz69

y is that?
the problem i was seeing is how u r sending current 2 the plugs seeing that u will be taking out the harness

sidewayz69

thats the problem............
i cannot get 1 and i dont no what it looks like or even have the jack for the air flow sensor......
so basicially i dont no what i am looking 4( how it looks and the wire colour codes)

http://www.youtube.com/watch?v=FjDP0qfb09c
i dunno what happened last time but ...

sidewayz69

yeah ppl ......... after so long the engine start up
WITHOUT THE AIR FLOW.....................
we fixed and secured all the wires and the engine will not rev now

can any1 assist mehttp:

//www.youtube.com/watch?v=FjDP0qfb09c

sidewayz69

well so far
REALLY BAD!!

i had the radiator hoses mixed up so the water was not circulating ....
i went and moved the ports on the radiator so hopefully that will be good now
its just left 2 sort out the electrical

sidewayz69

thanks bill.........if i had seen that post ah sooner i would have saved some money on the electrical that i did.......... and 2 ppl did it eh but something is wrong still............... its ah non turbo 63 i dunno if its the 1g or 2g engine
anyhow......... the engine was started WITHOUT THE AIR ...

sidewayz69

ah taking out d pics 2day
and i am not getting through with ur link

sidewayz69

nice

really nice!

once i find out how
i will post pics of my rwd 4g
or what kind of gear box is that?
i am using the sirus 2000 gear box on mine

sidewayz69

well
i am from the caribbean
so no need 4 the winter lines na(lol)
so i can condem the 2 lines then?

sidewayz69

i am having trouble emailing the photos

is it possible that i can blank off those lines?

sidewayz69

yeah ppl
here what is going on.....
i have the 2g-4g63 engine that i am making rear wheel drive but i dont know about the water lines

there are 1 line that is coming out from the thermostart unit ( dont no where that is going)\\\

then there are 2 lines coming out from the pipe line that goes 2 ...

sidewayz69

the flywheel is the same, I have run one in the past. You want the 88 quest because it uses the bigger clutch.. The earlier flywheels are the same but drilled for the smaller clutch which is probally the same diameter as you stock one. The bigger quest clutch is 225mm I believe.
Dave

yeah
the ...

sidewayz69

L 200?
hmm not 2 sure but i am going the same kinda swap but my engine is going into a galent

i used the original sirus 2000 engine mounts and the gear box bolted up directly on the engine
i also used the same thermostart unit that the 4g63 came with
we beated in the firewall and did ah lil cutting

sidewayz69

you can E mail me the pic's and I can post them for you

I went back and redisigned the R 154 bellhousing to accept the EVO bolt pattern as well as the narrow block
This will also include the option of an AWD flywheel or the FWD flywheel depending on where the starter is drilled when ordered

I ...

sidewayz69

i took out some pics yesterday but i dont no how 2 upload them

sidewayz69

the only non-turbo 4G63 AWD that I know of is a Galant GSX. Is that what you are asking???

thanks

<edit> and that was a 6-bolt crank to my knowledge. and there is a small chance the late galants had non turbo 7 bolt. Not sure tho...
i think he means 4wd truck 4g63 sohc . i think that would be a ...

sidewayz69

the 4g63 ( i think) thats comes 4 wheel drive non turbo that has ah 7 bolt
crank comes from what car?

and what flywheel can work cause i dont have a 7 bolt hole crank

sidewayz69

yeah, YOU, do you have any pics?[/quote]

no
it is installed already

sidewayz69

who ?
me?

well if so i did this about ah month ago with no problems
direct bolt up in ah 4g67
which is suppose 2 be the same as the 4g63 cause the
cylinder head gasket and other parts are interchangable

the starter also fall in the same position with d rwd set up( cause i am turning around ...

sidewayz69

well any how my guess was rite
the engine bolted directly on the sirus mounts and on the sirus gear box
the problem is the water unit is hitting the fire wall
some thing needs 2 move
not sure as yet

sidewayz69

the sirus 2000 fly wheel bolts up directly on d evo block
i am putting ah 4g67 in ah rwd galent and i am using the sirus gear box
with the engine
also the sirus 2000 sandwich plate bolts up directly in my block so it will
work 4 u 2

sidewayz69

yeah ppl
on the 4g67 block there are 2 bolt hole positions
1 is closer 2 the front of the engine and the next 1
is close 2 the middle of the engine

i no that the bolt hole position closer 2 the front is 4 the front wheel drive mounts so that mean the bolt hole positions in the middle is 4 the rear ...

sidewayz69

thats some nice maching and fabrication there
i am ah machinest and when i see those mods i feel proud knowing what can be done

sidewayz69

The cas is the Cam Angle Sensor, on the early hohc engines, it also served as the crank angle sensor.

The engine cannot run without this as it orchestrates the ignition and injectors firing.

ok i kinda understand u now so what i am trying 2 do is not making sence then
cause it now looking as ...

sidewayz69

greenghost wrote:my motor is actually going in a mustang. So that's the only reason just wanted to see some pics in a car. Those starion mounts I might try them

SIRUS 2000 engine mounts thats what u should be looking for

sidewayz69

i most likely feel is the linkages or the selector on the gear box
its bent or out of alignment

i was not getting 1st 2nd and sometimes reverse but my problem was my shifter
i had a 4speed shifter instead of a 5speed
the rear wheel drive sirus 2000 and 5fw box in a galent

sidewayz69

DJpowerHaus wrote:Where are you from sideways69? And doesn't that make your shoulder sore after a while?

sorry for the late reply
i am from TRINIDAD and u?
do u no what kind of car is dat?

sidewayz69

i have the harness already

what is the cas/coil
and what about the crank sensor
ah think if u dont have the crank sensor the car would not be able 2 start ( not sure)

sidewayz69

yeah fellars need some serious help here

i have ah sirus 2000 and i want 2 put the 4g67 head on the block so the car will run better but at this time i think i am running into some problems

ok here what my problems are

how the crank sensor is going 2 work?

how will i get the plugs 2 fire cause ...

sidewayz69

well people i am new on this site and i am putting ah 4g63 in ah 1982galent
could someone show me how 2 put up pics of the car and engine ...
i also did work on the head for myself.or the galent is RWD!
anyone with info share please.

Project Zero G Forums

Search found 36 matches

well it start up

help with plumbing!

need info please!

rwd project

4g67

going 2 put ah 4g in dis