Project Zero G Forums

kurb_appeal

A little something i have been working on

http://s1123.photobucket.com/albums/l54 ... t%20turbo/

Built a top mount manifold and went to an external wastegate as well. What do you think

kurb_appeal

Cams have been sold thanks for looking

Have these cams that I am not gonna be using. They are band new never installed. No box as it got wet so I quickly removed them so there was no damage.

I would like to trade these for an external wastegate. I would like a 38mm. Open to other sizes as well ...

kurb_appeal

Could you get away with painting the intake and maybe wrapping the exhaust to hide it a bit more for the next one? That might be some camouflage so the next guy does not notice it

kurb_appeal

I dearly need to know which wires on the alternator are the sense and light wires. I dont have the stock plug so I am trying to get this straightened out so my battery will charge

kurb_appeal

Well when I got it the car had 190000 miles which is a ton and judging from the way the engine was completely trashed and seized with broken rockers and munched turbo, I would have to say it saw some abuse lol. Thats kinda why I did this swap so I could go through it all. Bit I kinda got happy with ...

kurb_appeal

They are the early 4 bolt axles. I have read that the six bolt units will hold more but break in the same spot. Is it worth it to upgrade? I can actually order new 4bolt dudes from my local parts house. But they have no listing for the 6. So yeah I am not real sure what to do here[/b]

kurb_appeal

spapped the axles in two. from where the clips hold it into the rear end clean breaks. the rest is still inside the housing. its all got to come apart to get them out

kurb_appeal

Its the stock unit. I just pulled it out and its fine. So I drained the fluid out of the rearend and i notice the half shafts are both out! WTF I never pulled them and them and the previous owner parked it when he hygrolocked the stock engine siezed it up and broke a bunch of rockers. So this is a ...

kurb_appeal

So I finally get my car all together and road worthy. Its been three years working on this car, building this or that or whatever to make this that or whatever work lol. I have fought with everything it seems. But regardless I pushed through and got it going.

So today I get to drive it finally ...

kurb_appeal

The DIYPNP I am using has it all already if you feel the need to install during your particular build. I did cause I didnt want to have to come back later and do more. It also has built in boost nitrous launch pretty much everything but sequential but its easy to add if you want. Check them out at ...

kurb_appeal

For a wide or narrow block?

kurb_appeal

First off what harnesses are you using? I.E. 1g dsm 2g dsm 90 dsm. Second what vehicle are you trying to wire it into. And which version of megasquirt are you using. If you look on DIYAUTOTUNE.com they have all the wiring diagrams there or you can find them on the forums usually if you look around ...

kurb_appeal

I am finally in the red zone with this swap!!!!! I am waiting on a 90* silicone coupler to tie the piping to the intake and I have to weld a piece to the water pump for he lower radiator hose. Run some external wires for the megasquirt. Install the front struts and fill the trans with fluid. And ...

kurb_appeal

Well on my build the starion fitting was too short and did not fit on my eclipse rail. What I did was cut the line just above the fuel filter out of site and got a double barb fitting to splice in the dsm fuel line for the rail. It looks stock and does not leak

kurb_appeal

Just a Side Note, 4663 and 4G64 Rods ARE the same.
and you get a 2.3L motor because the bore is smaller.

look here

http://www.atomicspeedware.com/4g63strokergen1comboariasandpauter.aspx

I was unsure about the rods. Thank you for clearifying that. But I know if you use the 63 rods you dont have ...

kurb_appeal

come on guys what ever doesnt sell is gonna go to the dump or recyclers. I dont need this stuff hanging out any longer been here too long. Make me an offer on this stuff. It never hurts to have a spare around if ou need it.

kurb_appeal

You can use the 4g64 crank with the 4g63 rods. You just need pistons with a relocated wrist pin whole to bring the piston down further so it doesnt smash your head. MUCH cheaper than buying a whole new kit. The only thing is you may need to upgrade your rods eventually if you are going to apply any ...

kurb_appeal

I know this sounds sill but check your firing order of the wires from the coil pack to the engine. Since 1+4 and 2+3 fire together it may run fine at an idle if they arent far off in order. I have done this a few times by not paying close attention when hooking up my wires. Get them straightened out ...

kurb_appeal

I am getting ready to make a cop setup on my 4g63 and have some coils to go on it too. I was wondering if somebody would make me a template of their plate so i can cut the one I have already instead of buying another one and spending more money. If you would be willing to take yours off for a moment ...

kurb_appeal

buyer pays actual shipping as Im not looking to get rich just help out a bit.

have a stock starquest fuel pump. Good usable unit. Just took it out today to put in the big walbro. $50

I also have a twin scroll t4 turbo. .60 ar compressor 1.15 hot side. I took this apart to measure and inspect. It ...

kurb_appeal

What we always did on the dsm 4g63 running that as well as ecu link was set all the maf-t values to 0 and run tuning off of the ecu link. Made this problem disappear because maf-t is really hard to tune. Those little knobs accept the tiniest adjustments and are very hard to get correct. Not sure if ...

kurb_appeal

Well its been way to long since any progress has been made on this. I have got the car running!!! hooray but the ecu I originally purchased had some leaky caps and I ruined it more trying to fix it lol. I borrowed a buddies know good ecu and got it fired up. Revs like a sport bike, fast and hard ...

kurb_appeal

Your gonna like that one too. Even the stock evos are bad! I was thinking on that one before I got my 20g. with all the stuff I am doing it was hard for me to go smaller than the 20. especially as how I want to eventually go to a ball bearing gt35 of some sort or another. Its really to bad you dont ...

kurb_appeal

If the 16g is what your gonna go with you will be happy with it. I ran one on my 1g awd and man I could slide corners like a pro drifter lol. People who didnt know about dsm really didnt believe I had only 4 cyl under the hood. They come on fast at about 2500 and hold through till about 7300 on a ...

kurb_appeal

bike is sold thanks for looking

kurb_appeal

http://www.cardomain.com/ride/3834982/2 ... sper-wy-us

There is a link to some pics for those interested

kurb_appeal

05 Honda CBR600RR
I have for sale a 2005 Honda CBR600RR. It has 18000 miles( higher than actual due to aftermarket sprockets) and runs fantatic! Has white Repsol fairings on it now. From factory was red. The bike has a new fuel pump in it now and everything works perfectly! Also has new fork seals ...

kurb_appeal

lol yeah sorry i dont have an email for you or anything so i posted it up on here guess I forgot the pm part of it now that I look

kurb_appeal

if menace doesnt get back to me i will let you know

kurb_appeal

yeah i been looking at that option a little bit. why dont you email me Kurb_appeal@hotmail.com and we can chat about it

kurb_appeal

I have a set of these for sale or trade. I am needing an ecu for a 1g preferably an eprom. I dont remember if these ar rc or delphi brand but I do know that they work perfectly. We put them in my buddies dsm with an hx 35 and they made it come alive lol. So let me know I would like to get at least ...

kurb_appeal

the evo6 and later would have the intake manifold on the left side when mounted in rwd form. Although i dont think they will bolt up to your transmission. However bill on here could make you your bellhousing im sure if you got with him.

And technically the evo engines are a 4g63 but they are ...

kurb_appeal

I have a bike that I am trying to sell Its an05 CBR 600RR with a custom white silver REPSOL fairing kit. It has a sprocket and chain kit that changes the gearing and a jardine slip on. I would like to get $4500 for it but make an offer.

If purchased for my asking price I will replace the rear tire ...

kurb_appeal

The seven bolt crank will not fit in the six bolt block. They will not work together. Go down to the parts store and find a flexplate for a pre 94 mighty max that has the same engine. Before 94 they were 6 bolt iirc. This should solve all your issues with no fab or custom parts then bolt it all ...

kurb_appeal

So after almost a year of waiting and waiting I finally got my intake manifold back from the machine shop. I have been riding their ass for the last 6 months as they have been paid for a year when I dropped my parts off. Thank god it was right!!! I got it all on and am now finally doing the wiring ...

kurb_appeal

Well after talking to my cousin who is the sherriff that showed first on the second time she has been watching it and they are in fact not connected in any way. The people that got my storage unit have been apprehended today. Albeit most of my nice things they took are gone now. And they had already ...

kurb_appeal

Well I have officially been hit!

I have been robbed three times this month. My house my shop and my storage unit. Funniest part is none of them are connected. They are all different people just coincidence that i got it all three times. I have lost about 7000 in parts property and money so looks ...

kurb_appeal

Gonna miss that AWD hook for sure! Looks like its gonna be sick though

kurb_appeal

Well I was able to find a stock intake hear in town. It will not fit in the starquests without some other modifications It will hang down to low and hit the steering box and wont bolt up on the bottom.

kurb_appeal

Now what about this idea on a starquest? S dont have my manifold right now or I would check it out. Has anybody done this by now or have their manifold to try it out and maybe post some pics. I would like to see this before he gets to work on mine.

kurb_appeal

Finally got the wheels on and added some pics check the cardomain link in the first post tell me what you think.

kurb_appeal

ell today I got parts from the machine shop finally. He is in scottsbluff ne and im in casper so he has been making trips up here for measurements and what not. Kinda time consuming but well worth the wait.

I got my billet steel wheel spacers, I know kinda heavy but with the wheels it will make up ...

kurb_appeal

Or have a cover made that would cover it all up like on the corvette engines and the cadillac norstar engines. Plus it would fit in nicely in a row at a show until they walk up on it and see only four spark plugs.

If done right could get lots of awards for wild custom, and alot of the muscle car ...

kurb_appeal

I LOVE it. And only because I absolutely hate it when some guy buys a beautiful 32 ford coupe or some other long lost ford and drops in a 350 of some sort. It is the worst crime ever!!!... can you tell I was raised ford lol. But I also think you should keep the engine same make as the car.

But ...

kurb_appeal

Like stated above, make sure your cooling system is up to par. I have used a stock radiator in every car I have built, one being a 653 awhp wrx, and never had a problem.

And actually around town is where you will the most issues if any at all. The stop and go leaves a lack of air flow over the ...

kurb_appeal

Well the only other thing you would have to worry about is you are supposed to retard the timing on the cam gears half a tooth for the additional 6mm difference.

kurb_appeal

You have to use a 94 galant 4g64 dohc belt or a 4g64 sohc belt. The 4g63 belt will be too shorter with the added 6mm deck hight

If you go to the project zero g home page and look in the part numbers section in the drop down menu under 4g6x swap you it will give you both belt options and part numbers

kurb_appeal

So I guess my internet carrier is having many issues with their servers. I have made some more progress. Got the interior back together. Got it up on stands and am taking apart the suspension for the new stedebani bushings. Also going to send the trans to be built. My machine shop uncle has a guy in ...

kurb_appeal

Well against all odds its seems, With rain/snow mix, two flat tires and being by my self, I got the car to the new shop today. It was almost as exciting as getting the car...lol. I started cleaning out the previous owners mess, Which by the way has filled up two thirty gallon trash bags. I dont ...

kurb_appeal

Got my rims on friday. They are beautiful. Unfortunetly as with all of the quests, they dont make a rim for them. The offsets I had to settle for are +38 front and +35 rear. I gave the machinist the sizes I wanted to see on the spacers for starters and they are at the top of his list. I cant move ...

Project Zero G Forums

Search found 73 matches

SOLD New BC280 4g cams FT/FS SOLD

alternator wires

Transmission Woes

Coil on plug template

swap parts for sale in wy not much left

SOLD!!!

05 Honda CBR600RR

FS/FT: 750 Injectors

NON 4g 05 honda cbr 600rr

WTF!!??!?