4g63 in mighty max mounts?

89coltgt · Post by **89coltgt** » Sun Apr 15, 2007 10:47 pm

Anyone have pics of the motor mounts on a MM w/4g63 swap? Thanks.

peregrine · Post by **peregrine** » Mon Apr 16, 2007 11:30 am

they are stock 2.0 MM mounts.

91turboGSX · Post by **91turboGSX** » Mon Apr 16, 2007 11:56 am

I just used the stock ones from the 4g64 I pulled out of it. They bolt right up as long as you clearanced the firewall.

89coltgt · Post by **89coltgt** » Tue Apr 17, 2007 3:09 am

Will the 2.6 mounts be the same or do I need to find some 2.0 mounts?
I am going to modify the mounts to move the motor foard enough to clear the firewall with a modified themostat housing.

peregrine · Post by **peregrine** » Tue Apr 17, 2007 10:35 am

89coltgt wrote:Will the 2.6 mounts be the same or do I need to find some 2.0 mounts?
I am going to modify the mounts to move the motor foard enough to clear the firewall with a modified themostat housing.

completely different.

screemin eagle · Post by **screemin eagle** » Tue Apr 17, 2007 11:35 am

you can use one side of 2.6 mounts i believe i forget wich one but the bracket is almost identicle to the 2.0 mighty max and the rubber part of the mount is the same.

89coltgt · Post by **89coltgt** » Tue Apr 17, 2007 3:31 pm

peregrine wrote:
89coltgt wrote:Will the 2.6 mounts be the same or do I need to find some 2.0 mounts?
I am going to modify the mounts to move the motor foard enough to clear the firewall with a modified themostat housing.
completely different.

Are the 2.4 mounts and 2.0 mounts the same? Trying to widen my options when I visit the yards

peregrine · Post by **peregrine** » Tue Apr 17, 2007 3:32 pm

89coltgt wrote:
peregrine wrote:
89coltgt wrote:Will the 2.6 mounts be the same or do I need to find some 2.0 mounts?
I am going to modify the mounts to move the motor foard enough to clear the firewall with a modified themostat housing.
completely different.
Are the 2.4 mounts and 2.0 mounts the same? Trying to widen my options when I visit the yards

lol i guess one of them is the same. i was under the impression that they were completely different.

Post by **DJpowerHaus** » Tue Apr 17, 2007 8:30 pm

Section 11 - 510 of CAPS:

The Mitsubishi part numbers for both the right and left 4G63 / 4G64 mounting brackets is: MD041030

This also shows me definitively that the RIGHT mounts from a Starion G54B will work on both sides of the 4G63 / 4G64.

The rubber mounts have lots of different part numbers:
MD43612, MD006605, MB309030, MB309031. Any clue what the differences are for the rubber mounts? Some have brackets to bolt a heat shield to which might make for some differences.

Edit.... "02085R" sure looks different for the V6... either way CAPS says its the same MD041030 part number so... who knows.

Post by **DJpowerHaus** » Thu Apr 19, 2007 4:47 pm

Sadly it doesn't have Starion stuff in it.

I have version 3.41 with the Oct 2004 update.
Zipped up its 230MB!!! I got it here: http://www.akchun.com/caps/index.html

I saw that the 3000GT club had some links to a full JDM version but they wanted to charge me to download it. This version is pretty sweet though.

blue_crush · Post by **blue_crush** » Thu Apr 19, 2007 8:07 pm

i used the one of the 2.6 mounts and then found another one. but as for the rubber portion on the mount, the mighty max was 3/8" taller then the quest mounts. thats the only difference i saw.
I am currently making a one piece solid mount that sits alittle lower then stock.

peregrine · Post by **peregrine** » Thu Apr 19, 2007 8:11 pm

blue_crush wrote:i used the one of the 2.6 mounts and then found another one. but as for the rubber portion on the mount, the mighty max was 3/8" taller then the quest mounts. thats the only difference i saw.
I am currently making a one piece solid mount that sits alittle lower then stock.

if it works out ill buy a set off you. let me know asap.

blue_crush · Post by **blue_crush** » Thu Apr 19, 2007 8:13 pm

will do.

slowquest · Post by **slowquest** » Fri Aug 15, 2008 6:27 pm

oldcolt75....

if you go to a parts store to get mounts, you'll only get the rubber part, the part that actually bolts to the block, would have to come from either Mitsubishi, or the junkyard. The rubber parts I believe were the same for the Starion/Conquest, and the Mighty Max/D50, but it was mentioned above that the MM/D50 mounts sit a bit higher, I've not confirmed this either way

In your case, putting the 4g into a Colt, I'm not sure if there is a "factory" mount that will just bolt everything together. Hopefully, some of the other Colt guys can chime in here.

Burabuda · Post by **Burabuda** » Wed Jan 28, 2009 10:35 pm

dunno if you guys like old threads resurrected, but did anybody figure out the better insulator part #
MD43610 or MB309030/1 or MB041030

?

jezz_s13 · Post by **jezz_s13** » Mon Feb 23, 2009 1:45 pm

Does anyone know for sure whether the metal bracket part that bolts to the block (MD041030) also fits Evo blocks?

I can go take some pictures of the evo block if that would help?

Similarly, does anyone have any pictures of the these brackets mounted to their 4G blocks that they could post, please?