86 d-50 tranny

All the oily, spinning bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
abstract
Knowlege Seeker
Posts: 34
Joined: Sat Jun 07, 2008 5:03 pm

86 d-50 tranny

Post by abstract »

I know a 87-88 2.0 transmission will work on a 4g63 swap, but is the 86 D50 2.0 transmission is narrow.
Fabritory
Addict
Posts: 124
Joined: Sat Jun 05, 2004 11:39 pm

Post by Fabritory »

all rwd drives wide blocks
________________________________ FABRITORY ________________________
________________________Fabrication Laboratory___________________________
kuroi
Addict
Posts: 57
Joined: Mon May 07, 2007 5:29 am
Location: valley of sun

Post by kuroi »

^wrong... 2.0 trucks are narrow. I used a km132 out of an 86 mighty max on my 4G project, so I guess the answer is yes.
screemin eagle
Too Much Time on His Hands
Posts: 355
Joined: Thu Feb 03, 2005 1:50 am

Post by screemin eagle »

yes 86 maybe 87 and down 2.0 5spd rwd are narrow block bolt pattern. thats what i have on my narrow 4g.
88 conquest 4g63 now sporting a crankwalked boat anchor
abstract
Knowlege Seeker
Posts: 34
Joined: Sat Jun 07, 2008 5:03 pm

Post by abstract »

Cool, thanks alot. I have a 86 thats available to me.
Fabritory
Addict
Posts: 124
Joined: Sat Jun 05, 2004 11:39 pm

Post by Fabritory »

mommas wrong again!!! :D
________________________________ FABRITORY ________________________
________________________Fabrication Laboratory___________________________
Post Reply