I didnt imply that it was a bolt on did I? Neither is the FWD one. Hope I'm not confusing anybody.
Dad did mine at work for free!
4g63 checklist before going into the engine bay
Moderators: DJpowerHaus, mattmartindrift
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1782
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1782
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
Dont drop the motor whatever you do!!!!!
jk. It'll probably be fine. You might need to replace that oil filter attachment though.. hopefully it was the sensor that broke off in the motor and not the motor breaking off with the sensor. Keep us updated!
jk. It'll probably be fine. You might need to replace that oil filter attachment though.. hopefully it was the sensor that broke off in the motor and not the motor breaking off with the sensor. Keep us updated!
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.