I currently have a 4g63 1989 d50 with a stock d50 5 speed transmission. I know that you can somehow put a conquest shifter on the D50 transmission to move the shifter further back. Do I need to swap the whole tail section of the transmission or just that top shifter section? AND, does anybody have the stuff I need to do it?
Thanks
-Jeremy
D50 transmission with conquest shifter?
Moderators: DJpowerHaus, mattmartindrift
-
4g63mightymax
- Addict
- Posts: 91
- Joined: Fri May 26, 2006 8:43 am
- Location: MA
- Contact:
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
You'll need the whole rear tail section. Talk to some SQC guys and see if anyone has any blown transmissions that you can get the parts from.
I've done it to mine. Its tricky at first to put it back together but once you can imagine it in your head you can do it really fast first try.
I've done it to mine. Its tricky at first to put it back together but once you can imagine it in your head you can do it really fast first try.

Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
-
carguyf545
- Addict
- Posts: 175
- Joined: Wed Jul 27, 2005 12:41 am
- Location: centralia WA.
-
4g63mightymax
- Addict
- Posts: 91
- Joined: Fri May 26, 2006 8:43 am
- Location: MA
- Contact:
-
4g63mightymax
- Addict
- Posts: 91
- Joined: Fri May 26, 2006 8:43 am
- Location: MA
- Contact:
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
I have heard that the D50 yoke is the same, but have not tried it myself. The Starion tail housing does not change the length of the transmission.... you're actually using the same output shalf. Mounts and everything are the same.

Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
-
4g63mightymax
- Addict
- Posts: 91
- Joined: Fri May 26, 2006 8:43 am
- Location: MA
- Contact:
-
carguyf545
- Addict
- Posts: 175
- Joined: Wed Jul 27, 2005 12:41 am
- Location: centralia WA.
sorry about the slow response, i had a short in my phone line,(no internet). i will take the pics tomarrow. i have lots of pics to email this week end. it sucks when your internet goes down. there is not much to see. its a tranny with a bad bearing in the front shaft. message me with what you think the parts are worth too you. and please remeber i am not the dollar store and you cant find starion trannys anywhere.