Does anyone know from experience, the measurements or just an ebay link for an aftermarket front mount intercooler that would fit on a starion?
Thanks.
AFTERMARKET FMIC STARION
Moderators: DJpowerHaus, mattmartindrift
-
Xharlequinx
- Knowlege Seeker
- Posts: 13
- Joined: Sun Dec 16, 2012 9:27 pm
Thanks so much! this helps a bunch. I can at least benchmark off the measurements for that fmic core to fit something in. I just dont know if 31" x 12" x 3" for overall size ( 23" x 12" x 3" for just the core) will be small enough to fit.Lunacy wrote:I used an aftermarket evo 4-6 bar and plate one, that just needed custom brackets welding on but fits nice between the frame rails.
Sorry dont have any better pics of the actual mounting
[/img]
is that evo 4-6 bigger overall?
This is the one (or very similar) that i have used. Auction has measuremenst on it
http://www.trademe.co.nz/motors/car-par ... 964338.htm
http://www.trademe.co.nz/motors/car-par ... 964338.htm
86 Starion EX Racecar 4g63t DOHC
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
I was able to use a 24x12x3" core IC for both mine and Craig's swaps. You can pretty easily do IC pipes without cutting up the car other than removing the battery and a few brackets. Could possibly go with a 4" core, but I couldn't find any when I was looking for parts.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
-
BuickturboV6
- Knowlege Seeker
- Posts: 4
- Joined: Thu Jun 07, 2012 9:33 am