Idle problem
Moderators: DJpowerHaus, mattmartindrift
Idle problem
Hi guys got my car going in the weekend but it seems I have a problem with my idle... It will start up idle for a few seconds then just die, I can rev the motor up but have to keep it at about 3000rpm to keep it from cutting out. Any ideas? Seems like a fuel problem to me im running about 3bar through the fuel pressure reg?
-
sidewayz69
- Knowlege Seeker
- Posts: 36
- Joined: Tue Nov 11, 2008 6:19 pm
-
Mad Menace
- Addict
- Posts: 214
- Joined: Wed Nov 11, 2009 10:11 pm
- Location: Colorado
no, wrong! the cam sensor wouldnt really play into it like that. its got something to do with your after start enrichment. Are you running the stock ECU and injectors or was there some dabbling happening there?sidewayz69 wrote:u need 2 check your cam sensor timing and your engine timing
93' Max, 4g64, 16v DOHC, 18G Turbo, Walbro 255L, 27" FMIC, 2.5" Exhaust, Aero Exhaust, AEM C2DI w/COP, 510cc Injectors, Running on Megasquirt 3-X.
Videos as soon as it's 100% up and running.
Videos as soon as it's 100% up and running.
-
screemin eagle
- Too Much Time on His Hands
- Posts: 355
- Joined: Thu Feb 03, 2005 1:50 am
actaully yes timming could be apart of the problem. but most likley its tps or isc issues or even if its a stock turbo mitsu t bady could be a biss screw setting. or a vented bov while running a draw through mas. a little more info could help use better help you. whatcha got kid?
88 conquest 4g63 now sporting a crankwalked boat anchor