Good morning. Would anyone know if you can swap the starquest steering box into the mighty max or d50 to have a quicker ratio?
Thanks..
E
steering box swap q's
Moderators: DJpowerHaus, mattmartindrift
-
77amc
- Too Much Time on His Hands
- Posts: 455
- Joined: Wed Jun 06, 2007 1:41 am
- Location: N-W Mississippi, Under Memphis
I know it looked the same but wondered if my truck being a 1ton would have a different spline count or something on that order that wouldn't let me finish the easy swap.
BUT, are the ratios different? Quicker or same?
I jsut wonder why my steering box is leaking from the top.. Since the motor is out i let the parts just hang there and the res is lower but the box is leaking???
You get the pic of the balljoints?
Is that what you needed?
E
BUT, are the ratios different? Quicker or same?
I jsut wonder why my steering box is leaking from the top.. Since the motor is out i let the parts just hang there and the res is lower but the box is leaking???
You get the pic of the balljoints?
Is that what you needed?
E
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
-
77amc
- Too Much Time on His Hands
- Posts: 455
- Joined: Wed Jun 06, 2007 1:41 am
- Location: N-W Mississippi, Under Memphis
NON POWER?? I didn't say non power.. Both of mine are power..
I just need to know if the quest one is quicker than the maxs' one.
With a closer ratio and the quest rims, it should give better feel in that dept.
Old colt, Sure, whichever one i end up with, the other will be up for sale, just which one?
I guess i'll just put the ol visegrip on each and see how many turns it takes
E
I just need to know if the quest one is quicker than the maxs' one.
With a closer ratio and the quest rims, it should give better feel in that dept.
Old colt, Sure, whichever one i end up with, the other will be up for sale, just which one?
I guess i'll just put the ol visegrip on each and see how many turns it takes
E
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
I just can't get the DSM power steering brackets to work with the RWD water pump. Wanted to throw a non-power box on so Craig could drive the car around until I figured it out.

Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
-
Robert Venable
- Donating Member
- Posts: 229
- Joined: Fri Sep 22, 2006 8:37 pm
- Location: BATON ROUGE, LA
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
Smog. From my experience with a Starion ratio box with the power steering not connected, you will hate life. Perhaps there is less drag with a non-power box, but still. The ratio is what it is on the non power steering boxes to overcome the mechanical disadvantage

Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.