WTB: 38mm wastegate, 650cc injectors etc

[jeffball610]

I'm trying to put together some more pieces to my project motor. I need an external wastegate. Preferably a 38mm and hopefully with flanges. I will be running this off the O2 housing.

I will also need some injectors that can supply enough fuel to run 400hp max. Figured 650cc units would work. I'll be running basically a stock bottom end.

I'm also looking for an AFPR setup. I probably won't need lines that fit a DSM, but I won't count them out.

Also looking for a non DSM intercooler around 15"H X 20"W max to support 400hp.

I do need to get my 90 EPROM socketed and chipped for this setup as well. Mostly just need to compensate for the injectors and take out factory fuel cut and such.

Also need a Nissan R200 LSD from a 300ZX turbo car. I have a non LSD unit and eventually will need the other. I need lots of other odds and ends, but have the basic large items covered. Let me know what you have.

[emagdnim]

I have an ebay FMIC 24x12x4 $150 + shipping.

I have 1000cc FIC injectors for $275 and shipping.