4g63 in a colt wiring help

All the beeping, zapping bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

Everything you need can be traced from the ignition switch (key):

Constant +12V for ECU memory, clock
Switched +12V (ON, IGN, ACC)
Starter Signal (ST)
Ground (GND)

Can't be that hard...
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
Post Reply

Return to “Swap Electrical”