RWD 4G63 stuff: DSM link, 880's,GT35R, Magnus, FMIC, ect...

8URSTI · Post by **8URSTI** » Wed Jul 25, 2007 12:40 pm

JDM 4G63 Longblock:
Engine: 4G63T, ARP head Studs, Cometic Head gasket, JDM 6 bolt block, RWD thermostat housing welded in front of head W/ modified harness. 142 PSI across the board, HKS 272 cams $1600.00

Intake: Magnus RWD Manifold with Magnus injector rail and heat spacer $450.00

10 Gal alum fuel Cell: $80.00

Aeromotive Tsunami Fuel Pump: $220.00

Fuel Filters: 1)-6 in/out 2)-8 in/out $80.00 all alum

Intercooler 2.75” in/out ,11”x23”x3” core with 90 degree 4ply couplers and band clamps $160.00

Boost Gauge Autometer liquid filled 35psi : $40.00

GT35R Turbo internal gate, BB, Anti surge housing, ported cold side, jet hot coated hot side, DSM bolt on currently set up for RWD: $1200.00

NEW 1G DSM link W/eprom ECU $700.00

Areomotive boost reference FPR $85.00

91’ Coil in ‘90 housing $45.00

1G intake non JDM $10.00

1G Cyclone JDM intake $45.00

Turbonetics Raptor BOV $180.00

2G Mas With K&N filter adapter $50.00

“NOS” EFI NO2 kit with purge/bottle/gauge/heater up to 250hp $500.00

2 Summit plastic Seats with covers (black) $50.00

2 QA1 rebound adj. alum shocks $170.00

1G Head no freeze plugs W/stock cams $50.00

Ported 2G manifold $80.00

PTE 880cc Injectors used to start car once $240.00

1978 Dodge Colt 2-door:
Gutted, Half way tubbed, Primered, Engine bay stripped, comes with new windshield. $400

D50 Mighty MAX Truck:
Gutted , caged, Set-up for RWD 4G63T. $400

PICS:

tumuchNOS · Post by **tumuchNOS** » Wed Jul 25, 2007 12:47 pm

I take it your not going to build the colt now.

8URSTI · Post by **8URSTI** » Wed Jul 25, 2007 1:31 pm

tumuchNOS wrote:I take it your not going to build the colt now.

Nope, Greg threw me under the bus.......

75COLT · Post by **75COLT** » Wed Jul 25, 2007 4:59 pm

I am interested in the the stock cyl head and 2g manifold for 130.00
also interested in the extra long block if smog does not want it. thanks Ian

8URSTI · Post by **8URSTI** » Wed Jul 25, 2007 7:33 pm

75COLT wrote:I am interested in the the stock cyl head and 2g manifold for 130.00
also interested in the extra long block if smog does not want it. thanks Ian

The spare long block is a US. spec 4g63 turbo motor.

I can ship the 2g manifold and stock head next week.

t2fastalon · Post by **t2fastalon** » Thu Jul 26, 2007 12:33 pm

where are you located?

8URSTI · Post by **8URSTI** » Thu Jul 26, 2007 12:34 pm

t2fastalon wrote:where are you located?

Reno , NV

8URSTI · Post by **8URSTI** » Thu Jul 26, 2007 7:52 pm

smog wrote:selling the colt by any chance?

ohw close is ranco to vegas?

Yes, Im selling the colt. Its a 1978 2 door. Has already been completeley gutted and half way done being tubbed. The engine bay is stripped and taped ready for primer along with the entire body. It needs a new front window but I have a new one for it I will throw in with the sale. $400 gets it all.

I will sell EVERYTHING In this thread including the D50 mighty max truck, which is already gutted and caged and the Colt + all the parts listed for $6000.

Im 7 hours northwest of Vegas.

peregrine · Post by **peregrine** » Thu Jul 26, 2007 11:28 pm

8URSTI wrote:
smog wrote:selling the colt by any chance?

ohw close is ranco to vegas?
Yes, Im selling the colt. Its a 1978 2 door. Has already been completeley gutted and half way done being tubbed. The engine bay is stripped and taped ready for primer along with the entire body. It needs a new front window but I have a new one for it I will throw in with the sale. $400 gets it all.

I will sell EVERYTHING In this thread including the D50 mighty max truck, which is already gutted and caged and the Colt + all the parts listed for $6000.

Im 7 hours northwest of Vegas.

4.5 hours