All the oily, spinning bits
Moderators: DJpowerHaus , mattmartindrift
Fabritory
Addict
Posts: 124 Joined: Sat Jun 05, 2004 11:39 pm
Post
by Fabritory Mon Sep 18, 2006 6:25 pm
i didnt see it on the site
________________________________ FABRITORY ________________________
Fabritory
Addict
Posts: 124 Joined: Sat Jun 05, 2004 11:39 pm
Post
by Fabritory Tue Sep 19, 2006 4:50 pm
wouldnt cooling be affected? you wouldnt want hot spots in the head
________________________________ FABRITORY ________________________
DJpowerHaus
Sir Post A Lot
Posts: 1779 Joined: Wed Apr 07, 2004 3:24 pmLocation: Baltimore, MD
Contact:
Post
by DJpowerHaus Mon Sep 25, 2006 11:47 am
Can't wait to hear how it turns out.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
peregrine
Too Much Time on His Hands
Posts: 492 Joined: Tue Dec 28, 2004 5:26 pm
Post
by peregrine Tue Sep 26, 2006 11:03 pm
<<<<<<<<<<<<<< dubious at best
Robert Venable
Donating Member
Posts: 229 Joined: Fri Sep 22, 2006 8:37 pmLocation: BATON ROUGE, LA
Post
by Robert Venable Sat Sep 30, 2006 12:42 am
peregrine wrote: <<<<<<<<<<<<<< dubious at best
Why??
1990 MIGHTY MAX, REG CAB,
peregrine
Too Much Time on His Hands
Posts: 492 Joined: Tue Dec 28, 2004 5:26 pm
Post
by peregrine Sat Sep 30, 2006 1:18 am
theres like 5 threads about this now so search for them. me and leon are in cahoots about this. i dont like not having crossflow through the head.
Robert Venable
Donating Member
Posts: 229 Joined: Fri Sep 22, 2006 8:37 pmLocation: BATON ROUGE, LA
Post
by Robert Venable Sat Sep 30, 2006 2:56 am
peregrine wrote: theres like 5 threads about this now so search for them. me and leon are in cahoots about this. i dont like not having crossflow through the head.
Search is not working.
1990 MIGHTY MAX, REG CAB,
peregrine
Too Much Time on His Hands
Posts: 492 Joined: Tue Dec 28, 2004 5:26 pm
Post
by peregrine Sat Sep 30, 2006 4:08 pm
mainstream wrote: peregrine wrote: theres like 5 threads about this now so search for them. me and leon are in cahoots about this. i dont like not having crossflow through the head.
My head, block, and gasket have been modified to Bill's recommendations in the other post. So it will have crossflow.
Kane
you = guinea pig
Bill Hincher
Donating Member
Posts: 1625 Joined: Thu Jun 22, 2006 8:57 pmLocation: Toledo,Ohio
Contact:
Post
by Bill Hincher Sat Sep 30, 2006 7:43 pm
Bill Hincher
Donating Member
Posts: 1625 Joined: Thu Jun 22, 2006 8:57 pmLocation: Toledo,Ohio
Contact:
Post
by Bill Hincher Sun Oct 01, 2006 9:28 pm
