new here and need help

All the oily, spinning bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
gonzalezricardo
Knowlege Seeker
Posts: 2
Joined: Tue Mar 24, 2015 1:30 am

new here and need help

Post by gonzalezricardo »

Hi guys I'm new here I'm Ricardo from Puerto Rico I got a few questions I have a Mitsubishi mighty max with a 4g64 so I stop the truck and started to make a 4g64/63 head but my pistons are for 12v and I don't know what pistons bore buy and what diameter of piston rods use if some one help me thanks BTW
Top
gonzalezricardo
Knowlege Seeker
Posts: 2
Joined: Tue Mar 24, 2015 1:30 am

Post by gonzalezricardo »

Ohh forgot to said the head is from a Mitsubishi eclipse 97 turbo I'm planning to put some boost pounds on that thing lol so I can't use the original piston rods
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

Do you plan on going forged then? Have you checked out the Wiseco catelog?
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
Post Reply

Return to “Swap Mechanical”