Page 1 of 1
87 Chrysler Conquest
Posted: Thu May 03, 2012 4:27 pm
by slowquest
Had this engine together for a few years, finally started on the install.
2.4 4G64 Wideblock from a Mighty Max, 1g DOHC head, Mighty Max water pump.
I had already installed the water cooled oil cooler. IT FITS!
Even with the bigger StarQuest filter...
Posted: Thu May 03, 2012 8:04 pm
by 1SloEvo
Looks like you got a nice start to your project.
Posted: Sun May 13, 2012 9:01 am
by PoorMans180SX
This looks pretty cool.
Posted: Thu May 31, 2012 11:09 am
by 90awdtsi
since you used the 4g64 block im assuming it bolts right up to the stock transmission in your starion right?
Posted: Fri Jun 01, 2012 6:43 pm
by slowquest
yes it bolts right up.
my only "problem" was that i didn't keep the 4g block plate, the g54b plate doesn't really match up with the shape of the 4g block very well.
Posted: Fri Jun 01, 2012 7:02 pm
by 90awdtsi
o ok so if you would have kept the block plate it wouldnt have been a problem right
Posted: Sun Jun 03, 2012 4:11 pm
by Starfyter
Beautiful. What exhaust manifold are you running? I'd like to have mine top-mount.
What about cooling?
Posted: Sun Aug 18, 2013 1:03 pm
by slowquest
Double tap....
Posted: Sun Aug 18, 2013 1:04 pm
by slowquest
The turbo manifold is an EBAY special that I cut and rewelded the head flange to make a topmount. I have no idea if it will hold up, but thought it was worth a shot.
As far as cooling, I fabbed up a plate with an- fitting on the back of the head and will be using stainless hoses throughout. also welded on an- fittings on the water pump and radiator.