Has anyone had any experience with diamondracingwheels.com? Im thinking about having them custom make some 15" wheels. I took some dimensions and came up with the following:
The front tires seem like a typical 8" rims with 3"-3.5" backspacing.
The rears are a little more interesting...im torn between 8" or 10" rims. I don't think I have the option of anything between. I "think" I can get away with a 10" rim with 5.5" of backspace. This would allow me to run a 265mm. Would it be better to try and cram a 266mm on an 8" or 10" rim? Im sorts shooting in the dark. Anybody running big tires on their max?
mighty max guys...big tire question
Moderators: DJpowerHaus, mattmartindrift
-
4g63opelgt
- Knowlege Seeker
- Posts: 20
- Joined: Wed Aug 09, 2006 6:09 am
- Location: South-Central PA
Hey. I have a link to a wheel and tire size comparer. It doesn't list the Mighty Max, so I don't have the stock wheel size, offset, backspacing, etc. But you really don't need it. You can change wheel size and offset, and see what tires may fit. If you plug in the Mitsubishi stock size in Package 1 (15" x 8" with an ET of -25 will give you backspacing of 3.5") and the size you want to go to in Package 2 (15" x 10" with an ET of 0 will give you 5.5" backspacing), it may help you determine if there is room or not. I loaded the info from your post in on the comparer, but I don't know if that will transfer over to the link (It didn't). I hope this helps get you out of the dark somewhat. Hopefully someone will post that has 10" wide wheels so you will know. Good luck.
http://www.rimsntires.com/specs.jsp
http://www.rimsntires.com/specs.jsp
-
citrus3000psi
- Addict
- Posts: 71
- Joined: Tue Dec 09, 2008 1:51 pm
- Location: Indianapolis, Indiana
- Contact: