FYI... what you need to use this bellhousing... a wideblock.. an RX7 transmission ( have 4 left), starion flywheel and clutch... RX7 TOB and fork.... so basically get the bellhousing and slave cylinder from Neal. Get in touch with him on email: kansei@pathwaynet.comMike,
Well, I know they aren't worth much, but I'm not going to let the one I have go nor crawl under a truck and pull the trans to get the bellhousing for you for $60, no offense, my time is just worth more than that to me. I'll go for $100 each (mostly for the hassle pulling them out of the trucks), plus shipping if you want them.
Let me know,
Neal.
2 B2600 Bellhousings for sale!
Moderators: DJpowerHaus, mattmartindrift
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
I'd buy them now if I had the spare cash. But I dont, so everybody get one or both NOW! Even $100 is okay if it means you get one on the first try. I'm going to email him a photo to verify that its the correct one.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.