All the oily, spinning bits
Moderators: DJpowerHaus , mattmartindrift
4WDGTI
Knowlege Seeker
Posts: 5 Joined: Thu Jul 03, 2008 5:15 am
Location: Ukraine
Post
by 4WDGTI » Mon May 18, 2009 10:05 am
Hi guys, I want to bolt up 4g63 from MMC RWR (160 HP) to my km119 gearbox ( lancer ex 4g12 1.4). Will the km119 handle power of this engine?
4WDGTI
Knowlege Seeker
Posts: 5 Joined: Thu Jul 03, 2008 5:15 am
Location: Ukraine
Post
by 4WDGTI » Mon Jun 08, 2009 4:42 pm
So, what is the limit of this transmission for old school lancer ? May be it will handle Sohc 4g64?
turbostellar
Addict
Posts: 102 Joined: Sun Jan 07, 2007 10:09 pm
Location: Bowmanville, Ontario Canada
Post
by turbostellar » Sat Jun 20, 2009 1:37 pm
i had a 4g64 sohc motor bolted to the km119, it holds up good as long as you dont drive the car like ass. as in dumping the clutch at redline all the time. i had this setup for about ten years
4WDGTI
Knowlege Seeker
Posts: 5 Joined: Thu Jul 03, 2008 5:15 am
Location: Ukraine
Post
by 4WDGTI » Tue Jun 23, 2009 3:32 am
turbostellar, thanks, will try this setup.
oldcolt75, what is r154?
4WDGTI
Knowlege Seeker
Posts: 5 Joined: Thu Jul 03, 2008 5:15 am
Location: Ukraine
Post
by 4WDGTI » Sun Jul 26, 2009 11:26 am
I found transmission from 4g63b but it wide (13..cm). Is it possible to swap all parts inside this transmission, to my km119 body ?