What vehicle would have the engine block i need

Mazzhole · Post by **Mazzhole** » Fri Jan 09, 2009 2:51 pm

After about a year i have decided to get back to my starion project car. Last year about this time i crashed my DD subie and had to put the dough i had saved for repairs.

I want to put a 4g6x into my starion and have the block bolt up. I had done some research but want to be sure i get source the right block.

What years models and engine do i need to have the block bolt up to my starion tranny???

if the engine bolts up the the tranny how do i mount the engine do i have to do some welding? if using moving the engine mounts then is there a way to get the drive shaft line up w/o modifying it???

89coltgt · Post by **89coltgt** » Fri Jan 09, 2009 5:45 pm

You will need a wideblock engine to bolt up to the starion trans. You can find this as a 2.0 liter(g63b) in the 2.0l auto trans mighty max/d50. You can also use a 2.4l(g64b or 4g64) these will be in any 2.4l truck.

4wdisforwimps · Post by **4wdisforwimps** » Sun Jan 11, 2009 5:45 am

I used my block from my lancer turbo(4g63t)
why do you not use a block from a starion?

4wdisforwimps · Post by **4wdisforwimps** » Sun Jan 11, 2009 3:12 pm

Daviticus wrote:
4wdisforwimps wrote:I used my block from my lancer turbo(4g63t)
why do you not use a block from a starion?
If he's from the US, we don't have the SOHC 2.0 in Starions. We also didn't get the Lancer turbo here in the US.

O i see said the blind man