4g63 intake manifold question

abstract · Post by **abstract** » Sat Dec 20, 2008 5:20 pm

Swaping my starion, have a question about the intake manifold and need some direction. I don't want to remove the brake booster spacer. I have a regular 4g63 intake manifold and a cyclone one. I was thinking that the cyclone one will work better when it change around the throttle body, but I don't know will it clear every thing underneth the runners, also will it clear the brake booster. Has anyone used this one, or the EVO ones. Any one on board can modify the intake to work. Need some direction and possible pics. Really don't want to remove the brake booster spacer

Post by **DJpowerHaus** » Sat Dec 20, 2008 5:49 pm

On the regular DSM intake, trim off the EGR runner and back of the plenum up to the 4th runner. Should clear fine.

abstract · Post by **abstract** » Sat Dec 20, 2008 10:56 pm

So by doing this I don't have to remove the spacer on the brake booster?

turbostellar · Post by **turbostellar** » Sun Dec 21, 2008 3:07 pm

i trimmed that off my swap and it clears fine with space to spare. my underhood clearance is tighter in the car i am swapping in then in the starion