All the oily, spinning bits
Moderators: DJpowerHaus , mattmartindrift
Mr Hyde
Knowlege Seeker
Posts: 29 Joined: Sat Jul 28, 2007 8:10 pmLocation: OFallon, IL/ 5th Fleet NSA-Bahrain
Post
by Mr Hyde Wed Oct 29, 2008 5:46 pm
Ok.. I did a search on the info I'm looking for, but found nothing
DJpowerHaus
Sir Post A Lot
Posts: 1779 Joined: Wed Apr 07, 2004 3:24 pmLocation: Baltimore, MD
Contact:
Post
by DJpowerHaus Wed Oct 29, 2008 11:11 pm
Assuming its a wideblock, you can use any of the wideblock plates: D50, Starion, B2600. Whatever you have.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Mr Hyde
Knowlege Seeker
Posts: 29 Joined: Sat Jul 28, 2007 8:10 pmLocation: OFallon, IL/ 5th Fleet NSA-Bahrain
Post
by Mr Hyde Thu Oct 30, 2008 1:04 am
Thanks!!
89coltgt
Too Much Time on His Hands
Posts: 584 Joined: Wed Apr 11, 2007 2:50 amLocation: Ste Genevieve, MO
Post
by 89coltgt Sat Nov 01, 2008 10:48 am
Mr Hyde wrote: Thanks!!
That would be a narrowblock Geoff.
