fuel pump positive feed ..

All the beeping, zapping bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

The fuel pump is actually fed by the main relay. The ECU cannot handle the amps to power a fuel pump. The fuel pump signal from the ECU goes to the main relay to turn it on.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

Haha. Sorry. Yeah, that wire goes to the fuel pump's + terminal.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
Post Reply

Return to “Swap Electrical”