cas elimination

quest96 · Post by **quest96** » Sun Jul 13, 2008 12:40 pm

is there anything special I need to do to eliminate the 1g cas sensor or can I just plug it on the back of the head. I saw the oil hole not sure if the sensor needs to be in there or at least the base of it. Thanks...

IDriftNaked · Post by **IDriftNaked** » Tue Jul 15, 2008 11:40 pm

i wonder if a starion 2.6 g54b cam plug will work to plug up the cas hole?

IDriftNaked · Post by **IDriftNaked** » Tue Jul 15, 2008 11:51 pm

i know there was a post on using a 2nd gen cam and crank angle sensor on the 1st gen 6 bolts but i lost track on it. did anyone ever make it work?

77amc · Post by **77amc** » Thu Jul 24, 2008 10:34 pm

I've been thinkin about this and thought of a set up like a speedometer cable attaching the cam to the back of the cas.
You could mount it where ever the length of cable is optimum for the user.

The only thing would be how much vibration is made and translated to the cas, and if that would disrupt the signal

Just a thought.

Errol

AllanL · Post by **AllanL** » Mon Aug 25, 2008 5:14 am

IDriftNaked wrote:i know there was a post on using a 2nd gen cam and crank angle sensor on the 1st gen 6 bolts but i lost track on it. did anyone ever make it work?

i think this is what you're looking for, just the reverse...

http://www.roadraceengineering.com/1gcasin2g.htm