6 bolt dohc cyl heads (3 to spare) Edit: sold

IDriftNaked · Post by **IDriftNaked** » Wed Jun 25, 2008 1:05 pm

hello everyone, just wondering if anyone was interested in some 1st gen eclipse turbo heads that i have, all of them were pulled from the junkyard so i dont guarantee anything, just that they seem to be ok. the only thing i should say is that i never took the intakes off so they were sitting on their sides at an angle for months at a time, so i suggest taking them to a machine shop to check for any warpage before installing.
im asking for 50+ SHIPPING

i have 3 so 1st come first serve, 1st buyer gets pick of the 3 then so on and so on. i can send picks upon request.

David

Update: all heads are sold!!

75COLT · Post by **75COLT** » Wed Jun 25, 2008 1:09 pm

Are they complete w/ valves,springs,cams? I might be interested in one.

thanks Ian

77amc · Post by **77amc** » Thu Jun 26, 2008 1:02 am

How much different are they compared to the hunday (???) 1,8 head.
I was going to get a 1.8 from my local pull it for the 4g61t engine and put a bigger turbo also..
If they are pretty much the same, I'd be interested in one.

Is 'napa' in cali or behind some napa store? I'm very close to Memphis, 38654 for shipping uotes.
Any good turbos btw? Pics can be sent to synlube4u@aol.com

Errol

IDriftNaked · Post by **IDriftNaked** » Sat Jun 28, 2008 2:01 am

yup they are complete, i will put pics up soon and i will try and get a shipping quote asap

IDriftNaked · Post by **IDriftNaked** » Sat Jun 28, 2008 2:08 am

77amc wrote:How much different are they compared to the hunday (???) 1,8 head.
I was going to get a 1.8 from my local pull it for the 4g61t engine and put a bigger turbo also..
If they are pretty much the same, I'd be interested in one.

Is 'napa' in cali or behind some napa store? I'm very close to Memphis, 38654 for shipping uotes.
Any good turbos btw? Pics can be sent to synlube4u@aol.com

Errol

i think it all depends what year hyundai you have and whether you have a 6 or 7 bolt crank.
these are off of a 1st gen (6 bolt)
and yes napa is in cali (and yes napa auto parts did start off here)
i will send you a pic of the 3 as soon as i get a chance, sorry no extra good turbos. i will quote you shipping once i get the correct weight of these heads

David

77amc · Post by **77amc** » Sat Jun 28, 2008 9:15 am

Thank you sir. NO big hurry, I've got tons of 'stuff' going on.

I've got all wideblock 6bolt truck blocks (2&2.4) the 1.6 is from that colt I striipped. (only has 102K on it and doesn't smoke.)
Just thought of the Hyundai heads because of what is stated on the G1.6t site and here.. I don't know if the 2.0 head will work well or give too low a compression #..?? That's the only reason. There are tons of pull it cars here and NOW you've raised a question of years to use?? AARRRRHHggg..

Well if you know this let me know. Just don't hve the time to pull them.
Last head took me about an hour. (you can't take kids in there. Although mine would love it)

I've talked with that guy on the site that has the Evo3 manifold and turbo. No ONE has bought it from him yet.. Would it swap to a 1g head WITHOUT PROBLEMS in a RWD application?

That really is funny about the Napa stores..

Errol

IDriftNaked · Post by **IDriftNaked** » Tue Jul 01, 2008 11:42 am

if anyone has a modded intake manifold (reversed tb) i would be more than happy to trade.
pics will be up later this afternoon