All the oily, spinning bits
Moderators: DJpowerHaus , mattmartindrift
89coltgt
Too Much Time on His Hands
Posts: 584 Joined: Wed Apr 11, 2007 2:50 amLocation: Ste Genevieve, MO
Post
by 89coltgt Sun Jan 27, 2008 6:33 am
Looking for the length from the front of the bellhousing to the shifter arm in the r154.
89coltgt
Too Much Time on His Hands
Posts: 584 Joined: Wed Apr 11, 2007 2:50 amLocation: Ste Genevieve, MO
Post
by 89coltgt Mon Feb 04, 2008 3:58 am
Is Bill's housing roughly the same depth as the stock Toyota unit?
jeffball610
Too Much Time on His Hands
Posts: 619 Joined: Wed Feb 22, 2006 5:29 amLocation: Las Vegas, NV
Post
by jeffball610 Mon Feb 04, 2008 3:31 pm
From the end to the shifter is about 27" with Bill's bellhousing. The bellhousing is slightly deeper than the Toyota unit based on the pictures here. My input shaft does not go beyond the bellhousing.