DSM idle problem

Small talk, Forum and site news...

Moderators: DJpowerHaus, mattmartindrift

Post Reply
StarquestRescue
Knowlege Seeker
Posts: 27
Joined: Tue Aug 07, 2007 6:55 pm

DSM idle problem

Post by StarquestRescue »

I picked up a 93 2.0 NA. It wont idle right till it's 3/4 to fully warmed up. Keeps stalling or stalls when i try to give it gas if it is idling. Takes throttle ok warmed up, but linkage seems a little sticky when i first push on the gas peadle.

Can you guys recommend your favorite DSM forums? Thanks for your help everyone.

Image
Mits owner since 1980

88 Conquest 17c
88 Power Ram 50 4x4 2.6 turbo, 4.22 posi
Top
DJpowerHaus
Sir Post A Lot
Posts: 1782
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

I didnt want to be the one to say it.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
Post Reply

Return to “General”