is there away to put the 4G63 in without cutting the firewall?
i have a 88 factory yellow conquest and would not want to cut it up if i can help it. thanks in advance.
4G63 fitment without cutting
Moderators: DJpowerHaus, mattmartindrift
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
You could probably get it to fit in the stock position if you do the water modifications we've talked about here for the last year. The CAS sensor will probably have enough room to clear the firewall. If not you could crank trigger wheel with a standalone or you could move the engine forward 2 inches.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
-
Bill Hincher
- Donating Member
- Posts: 1625
- Joined: Thu Jun 22, 2006 8:57 pm
- Location: Toledo,Ohio
- Contact: