Parts needed

mikem · Post by **mikem** » Thu Jan 20, 2005 11:12 pm

Hey guys,

What parts should I be shopping for my 4g63 into a Starquest swap? I have right now a shortblock and head on their way....so now I need (electrical):

Wiring Harness
Injectors
Complete Intake Manifold w/ TB and sensors
Fuel Rail
MAS

Is the Cam Angle Sensor on the TB? Never even heard of one of them before I read about the 4g63 (I used to work with....less advanced motors)

What else do I need?

Thnks!
Mike

mikem · Post by **mikem** » Sat Jan 22, 2005 11:59 am

I just found a 92 GST Intake manifold complete for $130 shipped. Will all the sensors and stuff work on my 6 bolt motor?

CAS - 50$
MAF - Usually around $40, right"
Temp sensors- For the T-stat housing?
TPS- On the intake mani?
IAC- On the itnake mani?
Coil- Not a problem./
Power transistor - Where is this found?
Injectors - Have one on its way
Fuel rail - Have one on its way
Fuel pressure regulator - Have one on iits way
Main EFI Relay - Where is that?
ECU - Can find em all day long for $100
Harness - Same as ECU
Alternator plug - ?
Main battery power feed ?
Fan Temp switch ?

Thakns!

Mike

PS: Is that IT?

mikem · Post by **mikem** » Sat Jan 22, 2005 3:22 pm

Yeah, I figured that was super expensive (and it doenst include TB!)...well...I'll see if ihe will sell the wiring harness for $75 (he said somethin about that) and I'll find a better deal for hte intake!!

Thnks a ton for the help!!!
Mike

mikem · Post by **mikem** » Sat Jan 22, 2005 6:53 pm

Hey thanks!!

I'll bid on one of em...Are all the 1G TB's identical or should I look for a specific year?

Thanks for the part list I need, looks like I'll be doing some ebaying tonight

!!!

Mike

mikem · Post by **mikem** » Sat Jan 22, 2005 8:02 pm

<a href='http://cgi.ebay.com/ebaymotors/ws/eBayI ... 95241&rd=1' target='_blank'>http://cgi.ebay.com/ebaymotors/ws/eBayI ... 41&rd=1</a>

That took out a good chunk of what I need!

Found other stuff, but the auctions dont end for another day or so, thanks for the help

btw: followed your swap on sqc.com nice work

mikem · Post by **mikem** » Sun Jan 23, 2005 12:14 am

Alright, thanks for all the advice

I'm pretty happy. I'm eying a stock 98 GS-T fuel rail w/ 450s and a adjustable FPR real cheap on ebay now

Looks like its all coming together now! Thanks for all the help!

Just a warning --- I'll probably have more questions tommorow, when I can think!

thanks
Mike

Post by **DJpowerHaus** » Mon Jan 24, 2005 8:07 pm

Where can you get 1G turbo ECUs for $100 all day long!!? I really need a 1G EPROM ECU!