4g64 engine
Moderators: DJpowerHaus, mattmartindrift
4g64 engine
hey, is it possible to put a 04 outlander 4g64 engine into a 91 mighty max? my mighty max engine needs to be rebuilt. So I was wondering if it's the same kind of engine. all I know is the outlander's engine is 16 valve.
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1782
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
google is your friend
http://www.mitsubishi-forums.com/t2524- ... er-xls.htm
That shows you what else came with that engine. Might be able to gather from that what the bellhousing might be similar to. It could be the same bolt pattern as an evo. If you go that route I think Bill has a bellhousing up his sleeve.
http://www.mitsubishi-forums.com/t2524- ... er-xls.htm
That shows you what else came with that engine. Might be able to gather from that what the bellhousing might be similar to. It could be the same bolt pattern as an evo. If you go that route I think Bill has a bellhousing up his sleeve.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
-
StarquestRescue
- Knowlege Seeker
- Posts: 27
- Joined: Tue Aug 07, 2007 6:55 pm
http://www.starquestclub.com/forums/vie ... hp?t=67520
This post talks about the differences between the older 2.4 and the newer transverse ones.
This post talks about the differences between the older 2.4 and the newer transverse ones.
Mits owner since 1980
88 Conquest 17c
88 Power Ram 50 4x4 2.6 turbo, 4.22 posi
88 Conquest 17c
88 Power Ram 50 4x4 2.6 turbo, 4.22 posi