transmissions
Moderators: DJpowerHaus, mattmartindrift
transmissions
Has anyone tried to make an adapter to use a starion transmission on narrow block
-
Bill Hincher
- Donating Member
- Posts: 1625
- Joined: Thu Jun 22, 2006 8:57 pm
- Location: Toledo,Ohio
- Contact:
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
Narrow= 12 1/4" Wide= 13 1/4"
Both bolts would need at least 1/2" of room. Right there you can see that you'd run into trouble unless you tilted it. And then again... there really is no point to use that transmission when better options are out there.
Both bolts would need at least 1/2" of room. Right there you can see that you'd run into trouble unless you tilted it. And then again... there really is no point to use that transmission when better options are out there.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
