I'm gonna be doing a 4g63 swap in the near future. So, my 1984 dodge d50 ,2.6 g54b, motor will be coming out. the oil pan is bad, and has a spun rod bearing (bottomed out on speed bump;screwed up the drain plug). so make an offer on whole motor or make an offer for a part.
PM me for part request, offer, or trade!!!!!
Beings as we are all trying to get rid of our 2.6L engines this might not be the best place to be advertising this. Try www.starquestclub.com if you want to sell a 2.6. Sadly the supply of 2.6L engines with spun bearings is pretty high and the demand is pretty low.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
I'm gonna be doing a 4g63 swap in the near future. So, my 1984 dodge d50 ,2.6 g54b, motor will be coming out. the oil pan is bad, and has a spun rod bearing (bottomed out on speed bump;screwed up the drain plug). so make an offer on whole motor or make an offer for a part.