I guess the IC setup is good...

All the oily, spinning bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:

Post by DJpowerHaus »

Sombody on SQC found an awesome site on the Starion.. its so cool.
Image
Image

Look at the end tanks through the grill.. WEEEE.. we must not have been off by too much when we threw it together. I wanna work on real rally cars now.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:

Post by DJpowerHaus »

Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
s13steve
Knowlege Seeker
Posts: 6
Joined: Fri Apr 16, 2004 9:31 am
Location: Annapolis
Contact:

Post by s13steve »

Mike you are my hero...
Noise Maker
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:

Post by DJpowerHaus »

You guys are weird.. Hi Steve. Break shit.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Post Reply