All the oily, spinning bits
Moderators: DJpowerHaus , mattmartindrift
johnnyRacer
Knowlege Seeker
Posts: 15 Joined: Tue Oct 03, 2006 5:16 pmLocation: Chicago
Post
by johnnyRacer Mon Mar 05, 2007 7:10 pm
'92 mazda 2600i. Can this bellhousing be used with a 4g?
'83 Starion LS
johnnyRacer
Knowlege Seeker
Posts: 15 Joined: Tue Oct 03, 2006 5:16 pmLocation: Chicago
Post
by johnnyRacer Mon Mar 05, 2007 10:43 pm
This '93 is an auto trans. On the desireable '87-'88 models dose it matter if its an auto or manual trans?
'83 Starion LS
DJpowerHaus
Sir Post A Lot
Posts: 1779 Joined: Wed Apr 07, 2004 3:24 pmLocation: Baltimore, MD
Contact:
Post
by DJpowerHaus Tue Mar 06, 2007 2:29 pm
It will need to be a manual transmission.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
JasonAG
Knowlege Seeker
Posts: 37 Joined: Sat Jul 22, 2006 2:16 pmLocation: twin cities, MN
Post
by JasonAG Mon Mar 26, 2007 11:00 pm
smog wrote: no that isnt even a mitsubishi engine.
4wd ones work too dont they?
DJpowerHaus
Sir Post A Lot
Posts: 1779 Joined: Wed Apr 07, 2004 3:24 pmLocation: Baltimore, MD
Contact:
Post
by DJpowerHaus Tue Mar 27, 2007 7:36 pm
4WD should work as well.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
