drive shaft ??????

All the oily, spinning bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
miniblue89
Knowlege Seeker
Posts: 9
Joined: Sun Nov 19, 2006 12:45 pm

drive shaft ??????

Post by miniblue89 »

I have an 89 d-50 with an auto tranny (wideblock) I am putting a new engine with a KM132 behind it. (narrow block) will I have to change my driveshafts or can I use the saem one...If I can then AWESOME....but if I cant, will a driveshaft from a 2.6 with a 5spd work?????
Top
peregrine
Too Much Time on His Hands
Posts: 492
Joined: Tue Dec 28, 2004 5:26 pm

Re: drive shaft ??????

Post by peregrine »

miniblue89 wrote:I have an 89 d-50 with an auto tranny (wideblock) I am putting a new engine with a KM132 behind it. (narrow block) will I have to change my driveshafts or can I use the saem one...If I can then AWESOME....but if I cant, will a driveshaft from a 2.6 with a 5spd work?????
a tape measure and some experimentation will tell you this........
Image
Top
Old Colt
Addict
Posts: 129
Joined: Thu Nov 30, 2006 7:48 am
Location: Vermont USA
Contact:
Contact Old Colt

Post by Old Colt »

Both the output spline and length of the front shaft are different.
Top
Post Reply

Return to “Swap Mechanical”