Any cheap right side up manifolds?

All the oily, spinning bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:

Post by DJpowerHaus »

Top mounts are neat.. not anything available off the shelf that I know of. Do what Matt says... or you can build a tubular one... or have a tubular one made for you. Last time I checked Full Race would do one for you for $1200.

But really.. after seeing Matt's KA24 with a log manifold.. I really cant justify NEEDing anything but a log manifold. His car rips (see pic) on a log manifold.

Brian at MA told me.. "exhaust is stupid, it doesnt care where it goes".. which is true to an extent.. but are you going for the last 10%... because if you are it'll cost you 600% more.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Post Reply