hi all i am working on a mpi swap for the starion 2l, using the intake manifold from a galant.
i want to use the 2l DSM engine harness and ECU as found in the eclipse /evo. I will be using most of the sensors from the evo. My question is this, i will also be keeping some of the starions sensors
like oil pressure and tach can these be wired easly into the DSM harness, assume that these will be the only starion guages kept. i have read the tech write up but i am still unsure
thanks
eclipse/ evo wiring harness
Moderators: DJpowerHaus, mattmartindrift
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
I agree that it is doable. Most stuff is handled through the B38 plug. There is a fuel pressure sender for the gauge too, Matt.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.