rx-7 starquest transmission

All the oily, spinning bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
i-w
Knowlege Seeker
Posts: 23
Joined: Tue Oct 11, 2005 3:46 pm
Location: Rochester, NY

Post by i-w »

what are the gear ratio for each? compared to each other. 1 2 3 4 5 reverse?

i personally hate the long 3rd gear in the quest. and was wanting a more even rpm for each gear shift. does the rx-7 have a more even ratio for each gear?
Top
yokomosQUEST
Knowlege Seeker
Posts: 11
Joined: Wed Jun 15, 2005 2:18 am
Location: Modesto Ca.

Post by yokomosQUEST »

and can we use one of them twin plate clutces for the RX7? that wouldn't suck donkey balls!
<span style='color:blue'>"Welcome to Sickville, population, YOU".</span> <br><img src='http://www.26liter.us/gallery/albums/us ... herday.jpg' border='0' alt='user posted image' />
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

Read everything in this thread: <a href='http://beatingyou.com/forum/index.php?showtopic=138' target='_blank'>http://beatingyou.com/forum/index.php?showtopic=138</a>

If you have any questions after that, and you probably wont, feel free to post and we'll figure it out.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
carguyf545
Addict
Posts: 175
Joined: Wed Jul 27, 2005 12:41 am
Location: centralia WA.

Post by carguyf545 »

after looking at this link, <a href='http://members.aol.com/solomiata/Drivetrain.html' target='_blank'>http://members.aol.com/solomiata/Drivetrain.html</a>

i have a question about rear ends, is there a bolt in replacement for differnet gear ratios?
Image
what a nice port job, probally hurt it more than i helped it.
Top
i-w
Knowlege Seeker
Posts: 23
Joined: Tue Oct 11, 2005 3:46 pm
Location: Rochester, NY

Post by i-w »

there are 3:90 and 4:22 for the starion conquest rearend.
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

3.54, 3.90, 4.22, 4.66 ... that's a decent amount of options if you ask me.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
carguyf545
Addict
Posts: 175
Joined: Wed Jul 27, 2005 12:41 am
Location: centralia WA.

Post by carguyf545 »

are those bolt in rearend, or gear replacements, will the stock lsd fit in the other gears,

i have a conquest as a parts car, it is 4 lug with an open diff. are the axles the same and the diff, the same as my starion.

im just looking for easy options, for a quick change of gear ratios
Image
what a nice port job, probally hurt it more than i helped it.
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

I know for a fact that the 3.54 will (that's stock) and the 3.90 and 4.22 will work with the LSD. In fact, there are already several guys on SQC that are running 3.90 gears.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
yokomosQUEST
Knowlege Seeker
Posts: 11
Joined: Wed Jun 15, 2005 2:18 am
Location: Modesto Ca.

Post by yokomosQUEST »

woo hoo :blink: , im in the 3.90 club, they suck :angry: woo hoo, 4.66 here i come! :D
<span style='color:blue'>"Welcome to Sickville, population, YOU".</span> <br><img src='http://www.26liter.us/gallery/albums/us ... herday.jpg' border='0' alt='user posted image' />
Top
Post Reply

Return to “Swap Mechanical”