Jay Racing Front exit water outlet and thermostat...This is a complete kit used to convert the stock coolant flow out of the rear of the cylinder head, to the front. The kit consists of the aluminum mounting plate for the stock water outlet, aluminum block-off plate for the transmission side of the cylinder head (where the stock water outlet is), and hardware. Remove a large freeze plug and installation is a bolt on affair. Modification to the stock timing belt cover is required...I mocked this up on my motor but it doesn't have any miles, thermostat housing has thermostat and sensors, turbo water outlets are welded shut...$Sold
JMF coil bracket, coil pack, ignighter, NGK plug wires...A must have when installing an aftermarket intake manifold. Most sheetmetal intake manifolds on the market today do not have mounting points for the stock coils so we have come up with a simple solution to that. CNC waterjet cut from 1/8" thick aluminum, this bracket mounts on the backside of your 6 bolt block. It is designed to work with the 1G and 2G DSM coilpacks. Also included on the bracket are a few extra holes to mount the ignitor and other various sensors. You will need to supply your own hardware to bolt the actual coils to the bracket. This bracket will work with any aftermarket intake manifold and can be installed even after the manifold is on. Most spark plug wires will have more the enough length to reach the location of the coils...comes with working hardware and NGK plug wires, these wires still have some life left in them...$80 shipped OBO
RWD clutch setup...A New custom Southbend clutch designed to be used when mating a rwd Toyota R-154 transmission to a 4g63. comes with a flywheel that has been stepped and resurfaced, the center bore has been opened up to fit the R-154 input shaft...$195 Shipped I can include a used ACT 2600PP (+$20)
Last edited by need2boostpsi on Fri Sep 30, 2011 12:21 pm, edited 1 time in total.
Ill sell the disk separate, make offer! disc is a Southbend ceramic disk that is rated to hold 600 lb/ft. The disk is new!!! its a DSM clutch with Toyota R-154 HUB center.
