Starion 4g63
Moderators: DJpowerHaus, mattmartindrift
-
DJpowerHaus
- Sir Post A Lot
- Posts: 1779
- Joined: Wed Apr 07, 2004 3:24 pm
- Location: Baltimore, MD
- Contact:
What isnt loading?
This is for any RWD 4G63 stuff. Starions are pretty common though. That's what I did first.
There is no guide. You just have to do it
and if you hit any snags come on here and we'll offer our support. Its not like putting an SR into a 240SX. This motor/head/intake manifold/chassis never was offered together so there are some complications that just need to be solved one at a time (and all at once).
Once done the swap is probably more reliable than the 2.6. That's just if you dont hit any deer, trees or trucks. Those 3 things hurt reliability.
This is for any RWD 4G63 stuff. Starions are pretty common though. That's what I did first.
There is no guide. You just have to do it
and if you hit any snags come on here and we'll offer our support. Its not like putting an SR into a 240SX. This motor/head/intake manifold/chassis never was offered together so there are some complications that just need to be solved one at a time (and all at once).Once done the swap is probably more reliable than the 2.6. That's just if you dont hit any deer, trees or trucks. Those 3 things hurt reliability.
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.