D50 part out :(

For Sale / Want to buy / Trade

Moderators: DJpowerHaus, mattmartindrift

Post Reply
shroder15
Addict
Posts: 134
Joined: Thu Jun 11, 2009 10:44 am

D50 part out :(

Post by shroder15 »

The truck is going to be on its way down to SC saturday, and the tear down will being. If there is anything from the truck that you would be interested in, please let me know. It sucks to have to do this, but its what I need to do right now to accomplish my goals. I'll be taking one step back to take two steps forward in the very near future. Once the truck gets down, I'll have a FULL list of what I have for sale off of it, but if you see something you are interested in, lmk. Dibs are welcome, providing you are ready to buy in the next week. I really need to move some parts in order to get what I want accomplished, so feel free to offer a little less than what I am asking. The worst that can happen is a no :) Thanks again guys!

Motor/power adders:
4g63 6 Bolt short block - rebuilt w/ bsek - SOLD
1g Flipped manifold with blocked EGR (3g, Evo, Hyundai TB flange) - $100.00
Hyundai Throttle body with ISC block off and 3g TPS w/ pigtail: $50.00
***This allowed me to run a slightly modified galant T/B Cable for a VERY clean install IMHO***
Image
Image
Image
**Its hard to see, but it is set up to accept the EGR valve if you choose to run it**

Evo 8 Turbo, manifold, jpipe, 02 housing, and oil return line - $350
Image
Image
Image


EbAy billet underdrive pulley - $15.00
D50 waterpump w/ side exit welded- $50 (Weld could be tapped as it was backed with a small plate. Good spot for a water temp sensor)
Image
Image

Cut/Modified front cover - $15.00
Autometer boost gauge - $10.00
Glowshift blue digital oil pressure, boost, and water temp gauges - $40.00 each (100.00 for the set)
HKS Blow off valve - $125.00

Fuel:
1050cc FIC injectors - SOLD
-6an steel braided teflon lines - SOLD
-6an fittings - SOLD
Edelbrock inline filter (-6an)- SOLD
RCI 8 gallon Fuel Cell w/ foam (needs straps) -8an - SOLD

Trans/Driveline/Wheels/Tires:
Custom driveshaft (Th350/400/pg trans w/ motor in stock position and stock rear) - $100.00
D50 LSD with 3.909 gears - $100.00
Billhousing th350 trans adapter - SOLD
TH350 transmission w/ B&M transkit rebuild with auto/manual vb, shift kit, and upgraded clutches - $350.00
B&M Z-gate shifter - SOLD
3800 RPM Jegs stall converter - SOLD
Crager nomads (15x10 w/ 3.75" back spacing) - SOLD

Chassis/Body/Suspension/Interior:
Monroe rear Shocks - $30.00
2" Drop Spindles - SOLD
Eprom Socketed ECU: $250 (shipped)
Moates Ostrich v2.0: $120 (shipped)
D50 Cluster w/ tach: $75
Image

I'm sure there's more, but right now either I can't think of it or I'm not yet willing to part ways. If you see something you are interested in, PM me or post it in the forum and I'll let you know what the deal is. Also, if you are interested in the truck as a whole, I'm trying to get around $2200.00 obo for it. Also, check out http://www.hotrodcoffeeshop.com/forum/v ... ?f=6&t=182 for the most up to date pictures/description. PM me instead of replying to the thread as I have this posted on MULTIPLE forums and I want to be fair and not look anyone over. Thanks all!
Last edited by shroder15 on Wed Sep 29, 2010 11:58 am, edited 1 time in total.
shroder15
Addict
Posts: 134
Joined: Thu Jun 11, 2009 10:44 am

Post by shroder15 »

Eprom ECU and Ostrich added.
Post Reply