B2600 Bellhousing

jelliott510 · Post by **jelliott510** » Wed Aug 24, 2005 1:35 am

I have a B2600 bellhousing to sell. Anyone intrested?

fc3sbob · Post by **fc3sbob** » Thu Sep 01, 2005 12:22 am

I want it!!
PM Sent!

Post by **DJpowerHaus** » Tue Sep 06, 2005 9:04 pm

Did anybody buy this? If not, I'm going to buy it. And if that's not enough to motivate you to scoop it up for youself, you better bet I'm going to mark it up if its bolted to an RX7 transmission when I sell it to you in a few weeks!

slowquest · Post by **slowquest** » Tue Sep 06, 2005 9:29 pm

What's your price on an RX7 boltin deal DJ? Or at least the parts of it you have, and a list of everything else I may need, and where to get them.

jelliott510 · Post by **jelliott510** » Tue Sep 06, 2005 10:12 pm

I still have it. I have had no takers on the bellhousing or manifold.

1 Bad 68 · Post by **1 Bad 68** » Wed Sep 07, 2005 5:01 pm

pm'd you...what manifold do you have?

jecr · Post by **jecr** » Wed Sep 07, 2005 8:06 pm

jelliott510,

Have you tried checking your PM's?

jelliott510 · Post by **jelliott510** » Wed Sep 07, 2005 10:43 pm

Intake manifolds that have been modified. Throttle bodys on the correct end.

slowquest · Post by **slowquest** » Thu Sep 08, 2005 9:19 pm

How much do you want for the bellhousing? and where is it?

1 Bad 68 · Post by **1 Bad 68** » Thu Sep 08, 2005 10:58 pm

</div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (slowquest @ Sep 9 2005, 01:19 AM)</td></tr><tr><td id='QUOTE'> How much do you want for the bellhousing? and where is it? [/quote]
Dude won't tell anybody....several people pm'd him including me w/ no response.

Judging by his $300 intake + core for something a local shop will do for $75 we don't want it anyways.

jelliott510 · Post by **jelliott510** » Sat Sep 10, 2005 8:12 pm

Maybe you need to check your e-mail or the such. I responded to everyones messages. I figured posting here, rather then private messages would be better. There is no reason to talk smack!!! If you can get you manifold done for $75.00, SUPER! GO ELSEWHERE!! My $300 manifold has been pressure tested and checked for throttle body fitment. Do you get that for your 75 bucks? Why don't you show us what you got for $75? If you actually did do it.

jelliott510 · Post by **jelliott510** » Sat Sep 10, 2005 8:21 pm

I was trying to give people that don't have access to or can't find anyone to do the work, an opportunity to find what they need to get the job done. GO TALK SMACK ELSEWHERE!!!!!!!

1 Bad 68 · Post by **1 Bad 68** » Sun Sep 11, 2005 10:35 am

"I would like 200 for it. Let me know!!"

I just checked my email, but since I recieved one Friday for $82 shipped from New Jersey I won't be needing your $200 one!

1 Bad 68 · Post by **1 Bad 68** » Sun Sep 11, 2005 10:38 am

</div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (jelliott510 @ Sep 11 2005, 12:21 AM)</td></tr><tr><td id='QUOTE'> I was trying to give people that don't have access to or can't find anyone to do the work, an opportunity to find what they need to get the job done. GO TALK SMACK ELSEWHERE!!!!!!! [/quote]
You can buy an aftermarket sheet metal that the planum will bolt up for FWD or RWD applications for $500 (not cheap Ebay shit), I don't know of anyone that would pay $350 for a modified stock one. You don't think thats steep? Its not that big of a deal to pressure test it. I've decided to do this and will be selling my modified one for $125 shipped next time I go to his shop to pick it up.