clutch

bjlind8888 · Post by **bjlind8888** » Sun Mar 28, 2010 2:47 am

i have seen and heard people of doing a 6 bolt 4g63 in their mm.. but i got a 7 bolt engine for free so i figured i would throw that in their.. but my question in on the 7 bolt with flywheel clutch and pressure plate will work with my stock 2.0 carbd mm tranny???

Dropped_Mitsu · Post by **Dropped_Mitsu** » Sun Mar 28, 2010 2:01 pm

with the 6bolt you can use the 4g63 flywheel and pressure plate with your g63b truck clutch disk, I would assume you can probably do the same with the 7 bolt? The 4g63 clutch disk is the wrong size spline or count to go onto the truck tranny.

Djchunter · Post by **Djchunter** » Sun Mar 28, 2010 10:36 pm

You need to use a N/A 1g 7 bolt flywheel
Dave