wire connectors for fusebox?

Gentleman Rogue · Post by **Gentleman Rogue** » Sun Mar 14, 2010 5:58 pm

i like the idea of adding the fused circuits i need to my stock truck fuse box, but im curious what kind of wire connectors i would need that could press into the terminals on the fusebox and accept the bladed fuses?

whatd you guys use?

Dropped_Mitsu · Post by **Dropped_Mitsu** » Wed Mar 24, 2010 2:34 pm

I just cut out a fuse panel from my parts truck so it was easier to get to, then you can take out the little fuse clips in the fuse block with a small flathead screw driver and insert them into the fuse block in your truck.

Gentleman Rogue · Post by **Gentleman Rogue** » Mon Apr 19, 2010 8:40 pm

i ended up finding a gutted out Starion in the junkyard- and im happy to say it uses the same style connectors for the wiring. the smart thing to do is cut enough of the bundle of wires going into the box to just splice new wires onto them to instead of trying to take the connectors off of the wires in a saveable fashion.

just an FYI for anyone else looking to do the same thing as me.