98 hyundai sonata t.b. pinout for the tps

IDriftNaked · Post by **IDriftNaked** » Sat Aug 08, 2009 12:23 pm

so i finally decided to put on the modified evo intake that bill fabbed up for me. well, i thought that i would be able to use the stock 1st gen turbo dsm t.b. but its way too small for the evo tb mount flange.
after digging through my pile o crap, i realized that i had a sonata t.b. that mates up beautifully to the intake!
the only problem now is that it has a different tps. so i was wondering if any of you guys might know any site that i can look into to get the pinout that i need? i already tried the dealerships but all of them werent any help at all

thanks in advance
David

StellarDOHC · Post by **StellarDOHC** » Tue Aug 18, 2009 7:48 pm

PIN# - Wire color - Function
1 - Black/green - sensor ground
2 - Red/Yellow - Idle switch
3 - Blue/Yellow - TPS signal out
4 - Green/Red - 5volts in

This info is from mitchell on demand and i dont have any info to say which pin is which but u can always test to make sure

IDriftNaked · Post by **IDriftNaked** » Fri Aug 28, 2009 4:45 pm

thanks man, thats plenty of help!

David