83 StarQuest "B38" plugs

All the beeping, zapping bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

83 StarQuest "B38" plugs

Post by DJpowerHaus »

I am working on a harness for an 83 Starion swap. I did the harness a year ago and now I'm trying to verify my work, but I lost the pinout I came up with for the "B38" plugs (see photo). I made it by tracing out an 83 Starion harness, which I no longer have. Is there anyone out there that can help me find out the pin outs I'm looking for? I think I'm right, but I want to be 100% before I send this harness back (again).

Image
Image
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

On the 1983 and possibly other early years, the engine harness to chassis harness interface were these two connectors. Later years (87-89, maybe earlier) had one connector between the chassis and engine harnesses
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
IDriftNaked
Addict
Posts: 112
Joined: Mon Dec 04, 2006 12:53 am
Location: Napa

Post by IDriftNaked »

i should have that info for you no later than tomorow, im just waiting on the download file to be emailed to me
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

Any word from Tim?
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
IDriftNaked
Addict
Posts: 112
Joined: Mon Dec 04, 2006 12:53 am
Location: Napa

Post by IDriftNaked »

yea i just got word from him, i sent you the files
Top
DJpowerHaus
Sir Post A Lot
Posts: 1779
Joined: Wed Apr 07, 2004 3:24 pm
Location: Baltimore, MD
Contact:
Contact DJpowerHaus

Post by DJpowerHaus »

I got all the info. One day soon I'll put it up on the site.
Image
Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Top
Shevy
Knowlege Seeker
Posts: 1
Joined: Sun Jul 12, 2009 8:40 pm
Location: invercargill NZ

Post by Shevy »

anyone still got this info floating round

my spare loom is looking at some side cutters and a vr4 loom :lol:
Top
IDriftNaked
Addict
Posts: 112
Joined: Mon Dec 04, 2006 12:53 am
Location: Napa

Post by IDriftNaked »

Shevy wrote:anyone still got this info floating round

my spare loom is looking at some side cutters and a vr4 loom :lol:
pm me your email adress and i can possibly send you some good info on the 83. if by any chance i can't get my laptop to work, im pretty sure dj might still have the files for my car handy

David
Top
Post Reply

Return to “Swap Electrical”