help with plumbing!

sidewayz69 · Post by **sidewayz69** » Mon Jun 22, 2009 7:43 pm

yeah ppl
here what is going on.....
i have the 2g-4g63 engine that i am making rear wheel drive but i dont know about the water lines

there are 1 line that is coming out from the thermostart unit ( dont no where that is going)\\\

then there are 2 lines coming out from the pipe line that goes 2 the thermostart unit

lsr mike · Post by **lsr mike** » Tue Jun 23, 2009 7:56 am

Pictures....But I think your talking about the lines that go to the throttlebody to keep it from icing up in the cold, and one of the lines from the water pipe goes to the heater core.

THis may be of use:

http://mmeierle.com/images/Max/1G%20-%2 ... ENGINE.pdf

just click past the error on page 2

sidewayz69 · Post by **sidewayz69** » Tue Jun 23, 2009 5:45 pm

i am having trouble emailing the photos

is it possible that i can blank off those lines?

lsr mike · Post by **lsr mike** » Wed Jun 24, 2009 8:53 am

If you don't want to use the car in the winter. They're easy to do...not rocket science....

sidewayz69 · Post by **sidewayz69** » Wed Jun 24, 2009 8:20 pm

well
i am from the caribbean
so no need 4 the winter lines na(lol)
so i can condem the 2 lines then?

lsr mike · Post by **lsr mike** » Fri Jun 26, 2009 10:48 am

I routed the hose from the water pipe directly to the fitting on the thermostat housing, bypassing the Throttlebody. Then I bypassed the heater core bu using a short piece of hose from the water pipe to the coupling on the back of the head where the heater core return line connected.

you can see it in the pix

sidewayz69 · Post by **sidewayz69** » Sat Jun 27, 2009 11:22 am

ah taking out d pics 2day
and i am not getting through with ur link

sidewayz69 · Post by **sidewayz69** » Sat Aug 08, 2009 11:18 pm

well so far
REALLY BAD!!

i had the radiator hoses mixed up so the water was not circulating ....
i went and moved the ports on the radiator so hopefully that will be good now
its just left 2 sort out the electrical

galantpan · Post by **galantpan** » Tue Aug 18, 2009 3:07 pm

sidewayz.. you come out to dutty up the ppl forum...lol