4g63 crank measurement

All the oily, spinning bits

Moderators: DJpowerHaus, mattmartindrift

Post Reply
Djchunter
Addict
Posts: 79
Joined: Tue Aug 05, 2008 7:37 pm

4g63 crank measurement

Post by Djchunter »

does anyone know the measurement of the large center hole in the back of a 4g63 crank? the area that on other cranks that holds the pilot bearing

thankx for any input
Top
OLDIE
Addict
Posts: 78
Joined: Mon Feb 09, 2009 4:07 am
Location: Brisbane AUSTRALIA

Post by OLDIE »

THE HOLE IN THE CRANK IS 40.63MM BUT THE PILOTor SPIGOT BEARING GOES INTO THE FLYWHEEL
Top
Post Reply

Return to “Swap Mechanical”