D50 transmission swap

abstract · Post by **abstract** » Mon Jan 05, 2009 3:27 am

Whats all involved in swapping over the tail housing from a starion transmission to a D50 transmission. Also is this easy process. As far as the wilwood slave cylinder is there a mounting plate that can be purchased to mount the slave cylinder or do I need to fab up something. I haven't purchased the slave cylinder yet, just the thought came up. I know that the transmission swing arm for the throwout bearing needs to modified. Of course this is going into a starion with 4g63 narrow block

89coltgt · Post by **89coltgt** » Mon Jan 05, 2009 3:32 am

The tail housing swap is pretty easy, you basically just need to take a look at the assemble once you have it out and you should figure it out. I cannot really explain to you how to actually do it.

citrus3000psi · Post by **citrus3000psi** » Mon Jan 05, 2009 11:21 am

Look a few post down on the d50 hydro conversion. I have pictures of a slave cylinder mounted up on narrow block.