W T B Lower Balance shaft sprocket

77amc · Post by **77amc** » Sat Oct 18, 2008 3:19 pm

Good afternoon.
In my rebuild i outsmarted myself and said, "I'll put this right here so i won't loose it"
Well, i forgot where this special hiding spot is and can't put the rest of the front cover on without it..
Let me know if anyone would have one
It's the crank gear that runs the balance shaft and oilpump on the 2.6 G54b engine.
NOT the timing chain one.

Thanks .ERrol

77amc · Post by **77amc** » Sun Oct 19, 2008 2:27 am

Thank you sir. Just let me know..

Errol

PS can i just install these jet valves and remove the adjusting screw and nut?
What i'm finding out is my stock 225k+ mile cam actually had about .005 more lift than the quest cam that looked like the head was rebuilt not too long ago..???

77amc · Post by **77amc** » Thu Oct 23, 2008 4:31 pm

Shaun, Any luck finding one?
Not trying to bug ya, just need to get this engine in before shoulder surgery..

E

mr.andaya · Post by **mr.andaya** » Fri Oct 24, 2008 1:47 pm

I think i have a extra one at the shop, email me mr.andaya@gmail.com

77amc · Post by **77amc** » Sat Nov 01, 2008 10:07 am

I don't know how i missed this one..>?

Email sent.

Thanks Errol

mr.andaya · Post by **mr.andaya** » Mon Nov 03, 2008 10:58 pm

i e-mailed you a few times, check your junk mail? e-mail me your address(been waiting for a week lol) and ill send it to you, like i said in the e-mail pay it forword =D

77amc · Post by **77amc** » Tue Nov 04, 2008 1:08 am

will do when I get home in a bit..
My spam/junk box still showes empty

E

mr.andaya · Post by **mr.andaya** » Wed Nov 05, 2008 7:17 pm

it says your not accepting mail from my e-mail, get back to me.

i e-mailed the following

let me know if you get this msg. shipping wont be much, ill just say pay it forword(help some one else) deal? ill ship on friday

77amc · Post by **77amc** » Sat Nov 08, 2008 11:50 am

Did you send it out yet?
Let me know..

E

77amc · Post by **77amc** » Sat Nov 08, 2008 11:02 pm

Im fine with the 'deal' I love helpin people out. SOme know it some don't.

Didnt you get my mail of address?

I 'redid' my email filters and still no spam at all.. Kinda good, but man..

E

mr.andaya · Post by **mr.andaya** » Sat Nov 08, 2008 11:59 pm

yes sir, i sent it on friday. should be there monday or tuesday, i sent a few emails to you but they keep coming back saying your not accepting mail from my e-mail. i donno whats going on.

-joe

77amc · Post by **77amc** » Sun Nov 09, 2008 1:40 am

Joe, I just found out that my spam controls weren't set right.

Now I should get stuff from most everyone.
Thanks
Errol

77amc · Post by **77amc** » Tue Nov 11, 2008 12:20 pm

Recieved it! Thanks. Let me know what i owe you for shipping..

E

mr.andaya · Post by **mr.andaya** » Fri Nov 14, 2008 2:23 pm

na dont worry about it im not hurting for 5 dollars

good luck with your build

-joe

77amc · Post by **77amc** » Sat Nov 15, 2008 1:17 pm

Yeah, was so excited to get it i bolted it all on and forgot to put a little 10mm bolt in the lower guide.

I still have to find all the clutch bolts and pic up a new pilot bearing this morning.
Then I can put the motor to the trans and drop it in and hook it up.

Thanks again..

Errol

77amc · Post by **77amc** » Mon Nov 17, 2008 3:24 am

Save EVERYTHING! Man I jsut can't think that i did this to myself of hiding these parts..

I just spent two days looking for the (new) timing chain guides and had to take the front cover off again (braking the gasket of course) and found out I forgot to include one oilpump bolt too!!

Dang, I feel old. and need a nap.

Thanks again for all your help guys..

Errol