Project Zero G Forums

Mine can be found here...
http://forums.austarion.com/viewtopic.php?t=10203

Feel free to copy

Silas

Sorry but this is the only other pic i have!

Shows the missing holes at the front though...



Sorry about quality

Silas

Sorry DJ but i would have to pull of my head again and i cant be f*@#^d...


Cheers

(Ill see if i have any other older pics though)

Great, cheers fellas!

Hey Bill, my block didn't come with water outlets at the front as can be seen from these pics (82 australian spec starion 4g63)
http://i214.photobucket.com/albums/cc219/silobin/100_0037.jpg
http://i214.photobucket.com/albums/cc219/silobin/100_0034.jpg
does it really need flow through at the ...

I would like to use your rack idea, but because its a road car - where not allowed to weld anything up like that.


Who's going to catch you?

Exactly! the great thing about modifying the rack the way i have is you can barely notice the changes at all!

Also if you are worried you can get the ...

Been a while since I looked at a starion colum. Which parts are starion and which are galant?

Any idea of regular 4g63 powered galant parts will work? I'd think so?

http://i214.photobucket.com/albums/cc219/silobin/column3.jpg

http://i214.photobucket.com/albums/cc219/silobin/Column4.jpg ...

DJpowerHaus wrote:Awesome Silo! I take it you've used RX7 uprights? How are you doing the steering column?

Thanks guys! The struts are fc3s rx7 Dj, the column is as above using starion and vr4 galant parts with a few mods!

More pics here if anyone is interested!

http://forums.austarion.com/viewtopic.php?t=9942

Silas

Friggen Claasic...... HAHAHAHAHAHAHAHAHAHAHAHAHAH!
http://www.youtube.com/watch?v=ZdxFsOipJS8

Silas

First remove the spot welds from the starion X-member....
http://i214.photobucket.com/albums/cc219/silobin/StazX-member.jpg
Drill spot welds all the way through as you will use these holes later!

Ditto for the 240sx X-member....
http://i214.photobucket.com/albums/cc219/silobin/SilviaX-member.jpg

A ...

I am using a combination of starion and Galant vr4 steering columns on my car with fairly good results! i have also gone a slightly different way with the cross member, combining the lower part of the 240sx x-member with the two upper parts from the starion x-member! this removes any issues re ...

At least with the temp sensors at the back, if there is any problems you will see them at the apparent potential problem area!
What block are you using? Did you have to modify the front water gallery that goes through the front of the gasket/

Well done Mate.

Silas

Its definetly not a evo4-6 head! If you look above the injector holes on the manifold you can see another 4 injector holes in the head itself. The manifold may be from an evo 4etc but he head is evo1-3 (Small port)

Silas

Hey guys! Im an Austarion blow-in from Aus, and have noticed that wideblock is almost exactly the same as mine. The only difference is my block doesn't
have the two small holes at the very front of the block. I have a RWD 4g63 head gasket i will try to take some pics of if you like